Cleaning and care
17.6
Clean spray arms
2.
Pull the lower spray arm upwards.
Limescale and impurities from the
rinse water can block the nozzles and
bearings of the spray arms. Clean the
spray arms regularly.
1.
Unscrew the upper spray arms and
pull them downwards.
1
3.
Check the outlet nozzles of the spray
arms for blockages under running
water and remove foreign bodies if
necessary.
2
4.
Insert the lower spray arm. aThe
spray
arm audibly clicks into place.
5.
Insert the upper spray arms and
screw them tight.
45
To Next Page
Loading...
Need help?
General
