Softening system
10.3
Special salt
3.
A notice:Only use special salt for
dishwashers.
Do not use salt tablets. Do not
use table salt.
You can soften water with special
salt.
Pour
in special salt
Pour
the special salt into the storage
container.
If
the special salt refill indicator lights
up, fill special salt into the special salt
storage container immediately before
starting the program. The consumption
of special salt depends on the degree of
water hardness. The higher the water
hardness, the higher the consumption
of special salt.
DANGER!
Cleaner can damage the softening
system.
▶ Only fill the storage container of
the softening system with special
salt for dishwashers.
Special salt for dishwashers can
damage the washing container
through corrosion.
▶ To ensure that overflowed special
salt is rinsed out of the rinsing
container, fill the special salt into the
special salt storage container
immediately before the program
starts.
Fill
the storage container completely
with special salt. The water in the
storage container is displaced and
drains away.
4.
Place the lid on the storage
container and screw it on.
10.4
Switch off the softening
system
If
the special salt refill indicator
bothers you, e.g. B. if you use
combined cleaners with salt
substitutes, you can switch off the
special salt refill indicator.
1.
Unscrew and remove the lid from
the special salt storage container.
2.
When using for the first time: Fill
the storage container completely
with water.
Notice
To
avoid damage to the device, only
switch off the softening system in the
following cases: ¡The water hardness
level is maximum
times 21 °dH and you use a
combined cleaner with salt
substitutes. According to the
manufacturer, you can usually only
use combined cleaners with salt
substitutes up to a water hardness
of 21 °dH without adding special
salt.
27
To Next Page
Loading...
Need help?
General
