Installing/mounting
3.4 Mounting
Transducers
20 Compact Operating Instructions, 01/2018, A5E43390688_AA
The transducer is to be used only in the manner outlined in this operating instructions.
Normally, the transducer requires no cleaning or maintenance. However, if performance
changes are observed, immediately shut down the level measurement system and
perform a thorough inspection, especially on the transducer.
An XPS-15F transducer is shown in these examples. An explosion proof conduit seal
may not be required.
XPS-10, XPS-15,
XPS-30, XRS-5
Easy aimer (typical model)
To Next Page
Loading...
