Siemens ST-H - St-H

Installing/mounting
3.4 Mounting
Transducers
Compact Operating Instructions, 01/2018, A5E43390688_AA
25
Blind Flange
Face Flange
①
Nipple welded to bli
nd flange
①
Coupling
②
Coupling
②
Factory flanged transducer
③
Bolt
④
Gasket (Customer supplied)
⑤
Customer flanged, flat face only
⑥
Nut
Note
Tighten the flange bolts evenly in order to ensure a good seal between the mating flanges.
3.4.2.3
ST-H
Non-corrosive Applications
WARNING
Corrosive
Not suitable for use in a corrosive environment.