Connecting
4.2 Connecting note
Transducers
Compact Operating Instructions, 01/2018, A5E43390688_AA
31
Condensation in the device
Damage to device through formation of condensation if the temperature difference between
transportation or storage and the mounting location exceeds 20 °C (36 °F).
• Before taking the device into operation let the device adapt for several hours in the new
environment.
Note
Electromagnetic compatibility (EMC)
You can use this device in industrial environments, households and small businesses.
Note
Improvement of interference immunity
•
Lay signal cables separate from cables with voltages > 60 V.
Use cables with twisted wires.
Keep device and cables at a distance from strong electromagnetic fields.
Take account of the conditions for communication specified in the Technical data
(Page 37).
Use shielded cables to guarantee the full specification according to HART/PA/FF.
Note
Installation should only be performed by qualified personnel and in accordance with local
governing regulations.
To Next Page
Loading...
