Siemens ST-H - Appendix A: Applications

Transducers
Compact Operating Instructions, 01/2018, A5E43390688_AA
39
Appendix A: Applications
A
Note
•
The transducer is to be used only in the manner outlined in this operating instructions.
•
Normally, the transducer requires no cleaning or maintenance. However, if performance
changes are observed, immediately shut down the level measurement system and
perform a thorough inspection, especially on the transducer.
•
An XPS-15F transducer is shown in these examples
. An explosion proof conduit seal may
not be required.