91/120
Building Technologies Basic documentation: Communication via the KNX bus CE1P3127en
HVAC Products Large plants 30.08.2007
To keep communication to a minimum, the filter setting "Normal (route)" should be
retained (default, see section 8.2).
The IP routers are factory-set to obtain their IP address from a DHCP
1)
server.
The IP addresses can also be assigned manually with ACS (see the next two
screenshots).
1)
Dynamic Host Configuration Protocol. DHCP is a Client-Server-Protocol which reduces the time and
effort involved in assigning IP addresses.
Filtering of LTE telegrams
IP address assignment
To Next Page
Loading...
