TX-I/O Quick Start
Inserting the Address Keys
The TX-I/O address keys must be inserted, seated, and closed correctly in order
to function. Remove the address key from the strip, and then insert as shown.
1
TXIO0039R1
2
TXIO0040R1
TX-I/O Start Up
See the TX-I/O Getting Started Guide (553-636) for start-up procedures once the
TX-I/O modules are installed, addressed, and wired.
Information in this publication is based on current specifications. The company reserves the right to make changes in specifications
and models as design improvements are introduced. Other product or company names mentioned herein may be the trademarks of
their respective owners. © 2007 Siemens Building Technologies, Inc.
Siemens Building Technologies, Inc.
1000 Deerfield Parkway
Buffalo Grove, IL 60089-4513
U.S.A.
Your feedback is important to us. If you have
comments about this document, please send
them to
SBT_technical.editor@siemens.com
Document No. 553-632
Country of Origin: US
16 Siemens Building Technologies, Inc
To Previous Page
Loading...
