3/21
Building Technologies Division CC1N7696en
20.04.2016
Installation notes
Live and neutral conductors must not be interchanged
Standards and certificates
Applied directives:
Low-voltage directive 2014/35/EC
Directive for gas-fired appliances 2009/142/EC
Directive for pressure devices 97/23/EC and
2014/68/EC (2016-07-16)
Electromagnetic compatibility EMC (im-
munity) *)
2014/30/EC
*) The compliance with EMC emission requirements must be checked after the valve monitoring system is
installed in the equipment
Compliance with the regulations of the applied directives is verified by the adherence to
the following standards / regulations:
Safety and control devices for gas burners and gas burning ap-
pliances - Valve proving systems for automatic shut-off valves
DIN EN 1643
The relevant valid edition of the standards can be found in the declaration of con-
formity!
Note on DIN EN 60335-2-102
Household and similar electrical appliances - Safety - Part 2-102:
Particular requirements for gas, oil and solid-fuel burning appliances having electrical
connections.
The electrical connections of the LDU11 and the AGM comply with the requirements of
EN 60335-2-102.
EAC Conformity mark (Eurasian Conformity mark)
ISO 9001:2008
ISO 14001:2004
OHSAS 18001:2007
Certified complete with plug-in base:
Type reference
LDU11.323A17 --- x x x --- x
LDU11.323A27 --- x --- x --- x
LDU11.523A17 x --- x x x ---
LDU11.523A27 x --- --- x --- ---
To Next Page
Loading...
