en Operating the appliance
18
Measure and add detergent
and care products
Caution!
Damage to the appliance
Cleaning agents and agents for
pretreating laundry (e.g. stain removers,
prewash sprays, etc.) may cause
damage if they come into contact with
the surfaces of the washing machine.
Do not allow these agents to come into
contact with the surfaces of the washing
machine. If necessary, immediately wipe
away spray residue and other residues/
droplets with a damp cloth.
Measuring
Dose the detergents and care products
according to:
■ Water hardness (ask your water
supply company)
■ The manufacturer's instructions on
the packaging
■ The amount of laundry
■ Soiling
Filling
1. Pull out the detergent drawer.
:Warning
Eye/skin irritation!
Detergent and care products may
run out if the detergent drawer is
opened while the machine is in
operation.
Open the drawer carefully.
Rinse eyes or skin thoroughly if they
come into contact with detergent/
care products.
If swallowed accidentally, seek
medical advice.
2. Add detergent and/or care products.
Notes
– When measuring the amount of
all detergents, additives, care
products and cleaning agents,
always follow the manufacturer's
instructions.
– Dilute viscous fabric softener
and fabric conditioner with water.
This will prevent blockages.
– Pour liquid detergent into
corresponding dispenser and
place in drum.
Start the programme
Select the ! Start/Reload button. The
indicator lamp lights up and the
programme starts.
During the programme, the display
panel shows the "Ready in" time or,
after starting the wash programme, the
programme duration and the symbols
for the programme progress.
~ Page 9
Note: If you want to lock the
programme to prevent it from being
inadvertently adjusted, you can select
the childproof lock as follows.
Dispenser I Detergent for prewash
Dispenser
i
Softener, starch. Do not exceed the
maximum load.
Dispenser II Detergent for main wash, water
softener, bleach, stain remover.
To Next Page
Loading...
Need help?
General