Siemens WS12K261HK - Included with the Appliance; Installation; 5 Positioning and Connecting; Secure Installation

Positioning and connecting en
31
5 Positioning and
connecting
Positioning and connecting Included with the appliance
Note: Check the washing machine for
transport damage. Never use a
damaged washing machine. If you have
any complaints, contact the dealer from
whom you purchased the appliance or
our after-sales service.
Also required for connection of the
water drainage hose to a siphon:
1 hose clip Ø 24–40 mm (DIY store) is
also required for connection
to a siphon. Connecting the water
~ Page 34
Useful tools:
■ Spirit level for alignment ~ Page 35
■ Spanner with:
– size 13: for loosening the
transportation protection devices
~ Page 32
– size 17: for aligning the appliance
feet ~ Page 35
Installation
Note: Moisture in the drum is due to
the final inspection.
Secure installation
:Warning
Risk of injury!
■ The washing machine is heavy –
caution: take care when lifting it.
■ If the washing machine is lifted by
protruding components (e.g. the
washing machine door), the
components may break off and
cause injuries.
Do not lift the washing machine by
protruding parts.
■ If the hose and mains cables are not
routed properly, there is a risk of
tripping and injury.
Lay hoses and cables in such a way
that there is no risk of tripping.
Depending on the model
# Aquastop 8 Water inlet
+ Standard @ Installation and
operating instructions
( Mains cable H Elbow for fixing the
waste water hose
0 Water
drainage
P Covers





+
#
3