Siemens X204-2FM - Safety Notices

SCALANCE X-200
Operating Instructions, 03/2015, C79000-G8976-C284-06
3
Preface
Components of the product
The following components are supplied with a
SCALANCE X-200
IE switch:
● One device
● One 2-pin plug-in terminal block
● One 4-pin plug-in terminal block
● One DVD (configuration manual, operating instructions, Primary Setup Tool, GSD file,
SNMP OPC profile)
The following components are supplied with a
SCALANCE X-200
IE switch with the
PRO
supplement:
● One device
● Protective caps for the data interfaces
● Protective caps for the connectors of the power supply
● One protective cap for the signaling contact
● One DVD (configuration manual, operating instructions, Primary Setup Tool, GSD file,
SNMP OPC profile)
Unpacking, checking
WARNING
Do not use any parts that show evidence of damage. If you use damaged parts, there is no
guarantee that the device will function according to the specification.
If you use damaged parts, this can lead to the following problems:
• Injury to persons
• Loss of the approvals
• Violation of the EMC regulations
Use only undamaged parts.
1. Make sure that the package is complete.
2. Check all the parts for transport damage.
If the consignment is incomplete or damaged, contact your supplier or your local Siemens
office.