SIGLENT SDG2042X User Manual

SIGLENT
SDG2000X User Manual 33
The stdev shown on the screen when the instrument is powered on is the
default value or the set value of last power down.
2. Input the desired stdev.
Use the numeric keyboard to input the parameter value directly, and press the
corresponding key to select the parameter unit. Or use the arrow keys to
select the digit to edit, and then use the knob to change its value.
Figure 2-14 Setting the Stdev
To Set the Mean
1. Press Waveforms → Noise → Mean, to set the mean.
The mean shown on the screen when the instrument is powered on is the
default value or the set value of last power down.
2. Input the desired mean.
Use the numeric keyboard to input the parameter value directly, and press the
corresponding key to select the parameter unit. Or use the arrow keys to
select the digit to edit, and then use the knob to change its value.

SIGLENT SDG2042X Specifications

General

Brand	SIGLENT
Model	SDG2042X
Category	Inverter
Language	English