Sigma Controls MYRIAD DPC User Manual

15
CHANGE PASSWORD SCREEN
Once the password has been changed make sure a record of the new
password is retained. Access to the programming menus requires a
correct password.
Use the ↑ ↓ keys to enter a number up to 9999, select ‘NEXT’ and press ‘ENTER’ to enter the
‘change clock’ menu.
CHANGE CLOCK, MONTH, DATE AND DAY SCREENS
As described previously, use the ↑ ↓ keys to set the screen to the current time. Scroll to ‘NEXT’
and press ‘ENTER’ to move to the change month screen.
The ‘CHANGE MONTH’ screen, ‘CHANGE DATE’ screen and ‘CHANGE DAY’ screen are all
adjusted as above. After changing the ‘DAY’ screen, scroll to ‘NEXT’ and press ‘ENTER’ to
select the ‘Alarm Horn’ screen.
NOTE: DAYLIGHT SAVINGS CHANGES ARE AUTOMATIC.
ALARM HORN SCREEN
NOTE: Selecting the alarm horn to ‘OFF’ will disable the internal piezo alarm from sounding
when an alarm condition occurs.
!

Sigma Controls MYRIAD DPC Specifications

General

Brand	Sigma Controls
Model	MYRIAD DPC
Category	Controller
Language	English