Sigma 3-16K - Page 48

Operating Manual SIGMA 3-16K, page 48 of 69
03/06
4.2.3.2.1 Short-Run 1
Press the start-key during the whole short-run. The centrifuge accelerates with
maximum power to the maximum speed. After release of the start-key the
centrifuge decelerates with maximum power to standstill.
During short-run the time is counted up in seconds, "sec" is displayed.
A sequence of bars is indicating the elapsed run time. One single bar at "short
run" indicates that short-time operation had been selected.
After termination of the short-run the elapsed run time in seconds remains on the
display.