Sigma 3-16K - Page 49

Operating Manual SIGMA 3-16K, page 49 of 69
03/06
4.2.3.2.2 Short-Run 2
During this short-run the centrifuge is running max. 30 seconds and accelerates
to the set speed (rotor dependent).
Select "short run“ by turning the left knob and press the start-key.
During the short-run the time is counted up in seconds. A sequence of bars
indicates the elapsed run time. One single bar at "short run“ indicates that short-
time operation had been selected.
After 30 seconds the centrifuge decelerates to a complete stop.
The short-run can be early terminated by pressing the stop-key. The centrifuge
decelerates to standstill. The elapsed run time in seconds remains on the display.
The "short run“ can be left by selecting a set value as well.