Sigma EOX VIEW 1300 - EOX Ribbon Butler Assembly

30 I EOX
®
Assembly
#1
#2
6.2 EOX
®
Ribbon Butler
Insert EW-EN100 in Ribbon Butler
− Loosen the clamping
screw (2.5 mm Allen
key)
− Open the clamp
− Loosen the four screws
of the back case cover
(Phillips-head screw)
− Open the back
case cover
− Connect the cable from motor side to port #1 of
EW-EN100.
− Optionally, connect another SHIMANO component
(e.g. shifter) EW-EN100 to port #2 of EW-EN100.