Sigmac LE15AB - Antenna;Cable Selection; Automatic Channel Scan; Favorite Channel Management; Channel Visibility Control

The receivable channels will be stored automacally.
When searching channels, press MENU to stop.
If you select “Cable” as input signal in Antenna item, allows you to select
Cable System among: Auto, STD, IRC and HRC.
Use the ▼ buon to highlight the “Start to Scan”, then press the ►
buon to search the channels automacally.
The receivable channels will be stored automacally.
When searching channels, press MENU to stop.
Favorite
Allow you to add these channels which you desired as the favorite
channels. Use the ▲/▼ buons to highlight the “Favorite” item, then
press the ► buon to enter into the following menu.
Use the ▲/▼ buons to highlight the desired item, then press ENTER
buon to add or remove the highlighted channel as favorite.
Show/Hide
Allow you to show or hide the channels.
Use the ▲/▼ buons to highlight the “Show/Hide” item, then press the
► buon to enter into the following menu.
25
SIGMAC
LE15AB
26