SIGMATEK CCP 621 User Manual

CCP 621 C-DIAS PROSESSOR MODULE
Page 32 27.03.2020
44
VARAN MANAGER ERROR
An error number was entered In
the VARAN Manager and stopped
the program.
Possible Causes:
- real network does not match
the project
Solution:
Read logfile
45
VARAN ERROR
A required VARAN client was
disconnected or communication
error has occurred. The program
was stopped.
Possible Causes:
- damaged wiring
- missing power supply for
decentralized modules
Solution:
Read logfile
- analyze error tree
46
APPL-LOAD-ERROR
An error has occurred while
loading the application.
47
APPL-SAVE-ERROR
An error has occurred while
attempting to save the application.
50
ACCESS-EXCEPTION-
ERROR
Read-write access to prohibited
memory area, e.g. writing to NULL
pointer.
51
BOUND EXCEEDED
An exception error caused by
exceeding the memory limits
52
PRIVILEDGED
INSTRUCTION
An unauthorized instruction for the
current CPU level was given. For
example, setting the segment
register.
53
FLOATING POINT ERROR
An error has occurred during a
floating-point operation.
60
DIAS-RISC-ERROR
Error from the Intelligent DIAS-
Master.
64
INTERNAL ERROR
An internal error has occurred, all
applications are stopped.
Restart; report error to Sigmatek.
65
FILE ERROR
An error has occurred during a file
operation.
66
DEBUG ASSERTION
FAILED
Internal error.
Restart; report error to Sigmatek.
67
REALTIME RUNTIME
The total duration of all real-time
objects exceeds the maximum
time; the time cannot be config-
ured.
2 ms for 386 CPUs
1 ms for all other CPUs
Starting from Version 1.1.7

SIGMATEK CCP 621 Specifications

General

Brand	SIGMATEK
Model	CCP 621
Category	Computer Hardware
Language	English