SIGMATEK CSTO 082 User Manual

C-DIAS SAFETY DIGITAL OUTPUT MODULE CSTO 082
1.5 Page 1
Document changes and version status
Change date
Affected
page(s)
Changes/expansions/corrections
Version
19.12.2013
12 to 12a
Added Standard and Electrical requirements for UL table
1.1
17.02.2016
11
Switching-off inductive loads
1.2
15.05.2017
12
Specifications of maximum allowable output loads re-
fined
1.3
04.12.2017
5, 8, 9, 14
8
14
15
Removed standard IEC 61508
Added amendments „Category 4“ and „EN“
Added chapter „Conformity with EU Standards”
Added amendment „EN“ (62061)
Added „Cat. 4“
Added unit 1/h on PFH
D
value
Changed value from 7.05 auf 7.05E-09 geändert
Changed EMC resistance to 61000-6-2:2005
1.4
31.01.2018
9
Note Safety outputs protected polarity changed
1.5

SIGMATEK CSTO 082 Specifications

General

Brand	SIGMATEK
Model	CSTO 082
Category	I/O Systems
Language	English