Operating manual - English MARKER 2000
Copyright Silca 2002 15
6 MARKING [F2]
The marking program now includes a basic concept of a ‘model’, associated to which are
:
• configuration parameters
• a text and/or special functions
• a name to identify the model
This chapter describes all the procedures for the creation of a model and marking.
Press F2 from the main menu:
6.1 New Model [F3]
Press F3 to create a “new model” of marking.
The model of text can have a minimum of 1 line
and a maximum of 4. The following information
is associated with the text: position of the text on
the object to be marked (key, cylinder, etc.),
tracking of the area to be marked, with co-
ordinates, type of clamp.
[F1] help
Press key F1 for access to the guide.
WARNING: all the functions (F2-F3-F4 ...) described in the
Help section are enabled exclusively in this menu.
F2 = Marking
F3 = Data from PC
F4 = Diagnostics
F5 = Set-Up
F2
Local marking
F2 = List of models
F3 = New model
F4 = Fixed strings
F3
Zone = 1 : 1 Clamp = C1
Slide = 3 S = 1 O = 0
Dire. = Hor AutoF = [x]
Pcs = 1 of 1
F5 = Enter track. zone
F6 = Del. track. zone
F7 = Def. Strings
(F1 - Other)
F1
F8 = Tracking
F10 = Marking
ESC = Exit
(F1 - Other)
Esc
F1
F2 = Glass maintenance
F3 = Clamp
F4 = Counters
(F1 - Other)
F1
F1
Esc
Esc
Esc
To Next Page
Loading...
