MARKER 2000 Operating manual - English
28 Copyright Silca 2002
6.4.4 Fixed lines (CTRL+F2)
As described in the chapter.6.1.2, page 16, each marking area is subdivided equally into as many different
parts as there are lines to be marked, except where the last lines are blank.
To force the subdivision of a marking area, even with one or more blank lines, use CTRL + F2 to enter
the character “>>” into the last blank line to be considered.
2 lines + 1 empty
S1= SILCA S. p. A.
S2= VIA PODGORA
S3=
S4=
SILCA S.p.A
VIA PODGORA
2 lines
S1= SILCA S. p. A.
S2=
S3= VIA PODGORA
S4=
2 lines + 2 empty
SILCA S.p.A
VIA PODGORA
2 lines + 2 empty
S1= SILCA S. p. A.
S2= VIA PODGORA
S3= >>
S4=
S1= SILCA S. p. A.
S2= VIA PODGORA
S3=
S4= >>
SILCA S.p.A
VIA PODGORA
SILCA S.p.A
VIA PODGORA
2 lines + 1 empty
2 lines + 1 empty
2 lines + 2 empty
2 lines + 2 empty
To Next Page
Loading...
