Silca MARKER 2000 - 6.4.3 Entering symbols [F2]

Operating manual - English MARKER 2000
Copyright Silca 2002 27
• (02) Double Progressive
This function is similar to the previous one (01). With it a
progressive numerical series can be generated for marking,
with the addition of a counter connected to the number of
pieces.
6.4.3 Entering symbols [F2]
Certain special symbols can be marked.
One symbol can be entered for each line
available.
When the F2 key is pressed during text entry, the
display shows:
Use the arrow keys to scroll all the
special symbols available (a descriptive text +
the relative symbol by way of example).
Press key F10 to confirm the symbol selected.
In the place of the symbol itself, an abbreviated
description of it appears in brackets.
Special symbols can be used, also one after the
other (see example on the right):
Fig. 24
A001 1
A001 2
A001 3
A002 1
A002 2
A002 3
. . . .
A100 1
A100 2
A100 3
. . . .
Example with 3 pcs to be marked:
F2
S1= {A2}
S2=
S3=
S4=
List of symbols
AØ Reg. Mark =
®
F10
S1= {A2} {AØ}
S2=
S3=
S4=
result on
marked object
®
✆
S1=
S2=
S3=
S4=
Esc
(*) New symbols may be added to the list in the
future.
Special symblos available (*)
symblos corresponding to
®
{A0}
©
{A1}
✆
{A2}
☎
{A3}
✉
{A4}
☎
Key Center
001-33442
✉
Via DANTE, 7
.................
Examples of the use of special symbols