UM_FULL_56SL_REV_A 3
A. CHANGING THE BATTERY
BATTERY REPLACEMENT: SLRF90A
The Two-Way remote transmitter is powered by one “AAA” Battery. When the power of the battery weakens
A icon shall be displayed on the LCD screen. When the old battery is replaced, there will be beep sounds
to indicate the power is back up on the transmitter.
BATTERY REPLACEMENT: SLRF751
The One-way remote is powered by one CR2032 Battery. To replace battery use a coin or small at blade
screwdriver to carefully pry apart case
Small Flat Blade
Screwdriver or Coin
To Next Page
Loading...
