Silencer 56SL - Second Vehicle Security Operation; Clear Flashing Tamper Warning Icons; Stop Melody Sound; Illuminate LCD Display

UM_FULL_56SL_REV_A 9
P. SECOND VEHICLE SECURITY OPERATION.
You can be utilized to control a second vehicle’s keyless entry system. To program the
remote control transmitter to a second vehicle, Press and hold the + buttons
2 seconds to select car 2 or car 1 operation.
4 Button Remote Transmitter:
For Car 2: When the LED start 2 pause ash then release buttons.
For Car 1: When the LED start 1 pause ash then release the buttons.
LCD Remote Transceiver:
For Car 2: When 2 icon and the text show on the LCD display then release the buttons.
Under Car 2 mode, the 2 icon will ash.
For Car 1: When 2 icon disappears and the text show on the LCD display then release the buttons.
Q. CLEAR THE FLASHING TAMPER WARNING MESSAGE ICONS:
The ashing warning message icons in the LCD display will clear and reset when the transmitter
is used to lock the vehicle. Also, Locking then Unlocking the system will clear the ashing icons.
R. STOP THE MELODY SOUND:
Press any button on the LCD remote transmitter to stop the melody sound only.
S. ILLUMINATE LCD DISPLAY:
Press and hold the F button for 1 second and the LCD indicator will light up
T. OUT OF REMOTE CONTROL RANGE:
If the icon disappears to indicate the remote failed to receive a command conrmation.