Usermanual Motors 902x_903x Page 7
5.2 Special Function Socket
Used in connection with the Manual Override version for the motors
SG 9022 / 9023 / 9032 / 9033.
5.3 Low Voltage Switch Connections
Used for control by low voltage, group control or for the connection
of the programming cable.
5.4 Programming Buttons
Used for the programming of the endstops as well as for the
intermediate positions (scenes).
The numbers of the buttons are marked on housing of the motors.
The right button is nr. 1, the left nr. 2.
To Next Page
Loading...
