Description: Contains hardware configurations of the 8-bit MCU including pin states, clocks, interrupts, SPI configuration, and more.
File Name: radio.c/h
Description: Contains the API functions, defines, and variables for the EZRadio. These functions add an abstraction layer for the user
and allow higher level calls. Some of the functions are explained later in this document.
File Name: radio_config.h
Description: Contains all of the configurations for the radio. The radio properties are set here, including frequency, packet size, data
rate, modulation, etc., as well as the GPIO configuration.
With the demo up and running the next part of this document will begin to go into detail about the radio. Understanding the radio in
depth will better enable customization for building a specific radio application.
AN954: Programming Guide for EFM8 and EZRadio ®
Software Demos
silabs.com | Smart. Connected. Energy-friendly. Rev. 0.1 | 13
To Next Page
Loading...
