5.3.2 Generated Radio Configuration File
The configuration file is automatically generated by the "Radio Control Application" tool. It is interpreted as a C- header file called radio
_config.h and it has four sections. The first two sections are intended for the users and allow them to see the exact values of the API
properties. The last two sections are specifically intended for the example projects.
radio_config.h
User related
1. License of the active project
2. Radio setup configuration setting
in definitions
Silicon Labs example project related
3. Radio setup configuration
4. Specific configuration of the
example project
Figure 5.8. Radio_config.h File Structure
Below is an example radio_config.h file.
The "License of the Active Project" section consists of numerous commented lines about the license.
/**
* Copyright 2012 Silicon Laboratories, Inc.
* http://www.silabs.com
*
* @file radio_config.h
*
* H File Description:
* @brief Radio configuration macros and definitions.
*
* Project Name: EZRPRO_Examples
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
* PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
* CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
* SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* This software must be used in accordance with the End User License Agreement.
AN954: Programming Guide for EFM8 and EZRadio ®
Radio Initialization
silabs.com | Smart. Connected. Energy-friendly. Rev. 0.1 | 29
To Next Page
Loading...
