GB
│
MT
│
39 ■
SWR 1000 A1
Before fi rst use
■ Before starting to use the appliance, ensure that the appliance, the plug and
the cable are in a fault-free condition and that all packaging materials are
removed from the appliance.
■ First of all, clean the appliance as described in “Cleaning and Care”.
■ To open the appliance, pull the safety catch 3 for
wards a little and lift the
lid by the handle 2 at the same time.
■ Lightly grease the baking surfaces with an oil suitable for baking/grilling.
This will mak
e it easier to remove any manufacturing-related residue from the
baking surfaces.
■ Heat up the appliance to maximum temperature for a short time with the lid
closed:
NOTE
► During fi rst use, you may notice a slight smell (there may also be minimal
smok
e). This is normal and dissipates after a short time. Ensure suffi cient
ventilation. For instance, by opening a window.
– Insert the plug into the mains power socket. The red control lamp 4
lights up as soon as the appliance is connected to the mains.
– Wait until the green control lamp 1 lights up. This sho
ws that the appliance
is heated-up.
NOTE
► The green control lamp 1 can come on and go out several times during
this pr
ocess. This indicates that the temperature has briefl y fallen and
the appliance is heating itself back up. This is not a malfunction of the
appliance!
–
Pull out the plug and allow the appliance to cool down.
■ Clean the appliance again as described in “Cleaning and Care”.
The w
affl e iron is now ready for use.
IB_273413_SWR1000A1_LB5.indb 39 01.03.16 06:59
To Next Page
Loading...
