Silvercrest LBP 5 A1

■ 16
│
GB
│
IE
SLBP 5 A1
♦
From the list of found devices on your Bluetooth
®
playback device,
select the entry SLBP 5 A1 and, if required, enter the code 0000 to
connect the two devices. The Bluetooth
®
playback device is now
automatically connected to the speaker via Bluetooth
®
. If the pairing
is successful, you will hear a beep and
LED 1 0 flashes blue every
3 seconds.
♦ To stop the Bluetooth
®
connection, either briefly press the
Bluetooth
®
pairing button 4 or deactivate the Blue tooth
®
function on the Bluetooth
®
playback device. You will hear a beep
and LED 1 0 flashes alternately blue and orange (flashes blue). The
speaker is back in pairing mode (reconnecting mode).
♦ Alternatively, switch the speaker off as described above to deactivate
the Bluetooth
®
function.