To Next PageTo Next PageWhy can't I connect my Silvercrest Speakers to a Bluetooth device?
If your Silvercrest Speakers won't connect to a Bluetooth device, first make sure that Bluetooth is enabled on the playback device. Then, reduce the distance between the speaker and the Bluetooth device to less than 10 meters, ensuring there are no obstacles or other electronic devices interfering with the connection. Finally, verify that the speaker is switched on.
What to do if there is no sound from my Silvercrest LBP 5 A1 Speakers?
If you're not getting any sound from your Silvercrest Speakers, first ensure that the speaker is switched on by pressing and holding the button q for about 2 seconds. Also, check the volume level using the button 8. If it's too low, increase it. You may also need to increase the volume on your Bluetooth playback device.
General| Brand | Silvercrest |
|---|---|
| Model | LBP 5 A1 |
| Type | Portable Bluetooth Speaker |
| Power Output | 5 W |
| Frequency Response | 100 Hz - 20 kHz |
| Bluetooth Version | 5.0 |
| Bluetooth Range | Up to 10 m |
| Battery Life | Up to 8 hours |
| Water Resistance | IPX5 |
| Connectivity | Bluetooth, AUX |
| Charging Time | 3 hours |
| Power Supply | USB |
| Battery | Rechargeable Lithium-ion |
Details the purpose and content of the operating instructions, emphasizing safety and usage.
States that the documentation is protected by copyright and requires authorization for reproduction.
Clarifies the registered trademarks used in the manual, such as USB® and Bluetooth®.
Defines the intended use of the device for playing audio and atmospheric lighting, and specifies improper use.
Explains the meaning of the DANGER and WARNING symbols used to indicate hazardous situations.
Clarifies the CAUTION, ATTENTION, and NOTE symbols used for potential hazards and additional information.
Provides fundamental safety guidelines for operating the device, including checks before use and child safety.
Covers safety precautions related to the charger cable, heat, flames, and battery handling.
Addresses safety concerning unauthorized modifications, submersion (IPX7), and optical hazards.
Warns about the potential for hearing damage due to excessive volume levels.
Discusses potential interference of radio waves with medical devices and sensitive equipment.
Identifies key physical components of the speaker, including the speaker itself and the charging socket.
Lists and describes the functions of the device's buttons, LEDs, and light features.
Guides users on unpacking the device and checking for completeness and transport damage.
Provides detailed instructions on how to charge the device's integrated battery using the supplied cable.
Explains the meaning of LED indicators during charging and low battery warnings.
Details how to use the speaker in water and manage sound quality issues related to water entry.
Instructions for powering the speaker on, off, and activating Bluetooth pairing mode.
Steps required to connect the speaker to a compatible Bluetooth playback device.
Covers disconnecting Bluetooth, re-establishing connections, and speaker pairing modes.
Explains automatic reconnection features, pairing timeouts, and auto power-off functions.
Details the specific functions of each button for playback, volume, track control, and lighting.
Explains how to disconnect Bluetooth and provides notes on independent volume control.
Describes the True Wireless Stereo (TWS) feature for connecting two speakers for stereo sound.
Provides instructions on how to activate and deactivate the TWS mode between two speakers.
Details the various modes and operations of the device's LED lighting feature.
Offers solutions for common problems encountered when trying to connect to a Bluetooth device.
Provides remedies for faults such as the speaker not switching on or having no sound output.
Guides on how to clean the device safely and what materials to avoid.
Recommends suitable conditions for storing the device to maintain its quality and battery life.
Explains the proper disposal methods for the electronic device according to regulations.
Provides instructions for environmentally friendly disposal of the packaging materials.
Lists key technical specifications such as input voltage, battery, and Bluetooth version.
Details additional technical data including frequency range, operating time, dimensions, and protection type.
States the device's compliance with EU directives and provides a link to the full declaration text.
Outlines the 3-year warranty period and confirms that statutory rights are unaffected.
Specifies the terms and conditions for making a warranty claim, including proof of purchase requirements.
Provides step-by-step instructions for customers to follow for efficient warranty claim processing.
Lists telephone numbers and email addresses for customer service in Great Britain and Ireland.
Provides the official address of the importer, Kompernass Handels GmbH.
