Silvercrest SBD 60 A1 - Connecting and Switching On;Off; Wall Outlet Connection; Car Socket Outlet Connection; Cooling the Beer

23GB/IE
 Connecting and switching the
product on/off
m
WARNING! Risk of electric shock!
Never connect the AC supply cord with the DC
connection and the other way around.
 The product is equipped with 2 separate
power connectors (Fig. A):
– DC connector [8] for operation powered by
a car socket outlet.
– AC connector [9] for connecting to the wall
outlet (AC).
Connecting with a suitable wall outlet
(AC) and switching on/off:
 Before connecting the supply cable: Set the
AC/DC OFF/DC selector switch [6] to AC.
 Set the I/O switch [4] to O.
 Connect the AC supply cord [] with the AC
connector [9].
 Connect the power plug of the AC supply
cord [] with a suitable wall outlet.
 Switching the product on: Set the I/O
switch [4] to I.
 Switching the product off: Set the I/O switch
to O.
Connecting with the car socket outlet
(DC) and switching on/off:
 Before connecting the supply cable: Set the
AC/DC OFF/DC selector switch [6] to DC
OFF.
 Connect the DC supply cord [] with a 12 V
car socket outlet.
 Switching the product on: Set the AC/DC
OFF/DC selector switch [6] to DC.
 Switching the product off: Set the AC/DC
OFF/DC selector switch to DC OFF.
 Once the product is switched on, the on/
off control light [7] lights up and the LED
temperature display [] switches on.
 Cooling the beer
 Cooling the beer in the product:
– Place the sealed beer keg [] in the cooling
container [].
– Position the beer keg [] so that the keg
notch [] lines up with the container
notch []
– Align the tap unit [1] with the container
notch []. You do not need to connect the
tap unit with the beer keg [] to do so when
only cooling the beer.
– Place the cover [] on the cooling
container [].
– Switch the product on (see “Connecting and
switching the product on/off”).
 The LED temperature display [] shows the
current internal temperature in the cooling
container [].