Silvercrest SBD 60 A1 - Operation and Maintenance; Tap Unit Operation; Cleaning and Care

25GB/IE
 Fixing the tap unit [1] on the beer keg []
(Fig. G):
– Press and hold the lock buttons [] on the
tap unit [1].
– Align the tap unit [1] with the disposable
faucet. If aligned correctly, the handle on
the keg adapter [] extends through the tap
unit [1].
– Press down the tap unit [1] until the tap unit
locks in place in the keg handle [].
– Release the lock buttons [] on the tap
unit [1].
 Place the cover [] on the cooling
container [] (Fig. H).
 Operation
 Connect a beer keg [] (see “Connecting a
beer keg”).
 Switch the product on (see “Connecting and
switching the product on/off”).
 Place a glass under the tap unit [1] at an angle
of approximately 45°.
 Opening the tap: Pull the handle on the tap
unit [1] by about 90° with a swift motion
(Fig. I).
 Closing the tap: Release the handle on the tap
unit [1]. The handle automatically snaps back
into the original position.
 Replacing a beer keg []:
– Switch the product off (see “Switching the
product on/off”).
– Disconnect the product from the power
supply.
– Remove the cover [].
– Press and hold the lock buttons [] on the
tap unit [1]. Remove the tap unit from the
cooling container [].
– Remove the extension pipe [2] from the
disposable faucet.
– Remove the beer keg [] from the cooling
container [].
– Assemble a new disposable faucet with the
keg adapter [] and keg connector [] from
the new beer keg [] (see “Assembling the
disposable faucet”).
– Connect the new beer keg [] to the product
(see “Connecting a beer keg”).
 Do not leave an uncooled, open beer keg []
in the product after use.
 Cleaning and care
m
WARNING! Risk of electric shock!
Before cleaning, switch the product off
(see “Switching the product on/off”) and
disconnect the product from the power supply.
m
ATTENTION! Risk of product damage!
 Do not pour water or any other liquid into the
cooling container [].
 Do not clean any parts of the product in the
dishwasher.
 Do not immerse the product in water or other
liquids.
 Do not use chemical, alkaline, abrasive or
other aggressive detergents or disinfectants to
clean this product as they might be harmful to
its surfaces.
 Clean regularly surfaces that can come in
contact with food and accessible drainage
systems.