Silvercrest SBDB 5 A1 User Manual

GB
│
IE
│
NI
│
17 ■
SBDB 5 A1
Playback via Bluetooth
®
Pairing devices
Before you start using the radio for music playback via Bluetooth
®
you must
pair it with a Bluetooth
®
-compatible external playback device.
♦ If necessary, briefly press the
button 2 to switch on the device.
♦ If necessary, briefly press the SOURCE/ button 4 several times to
activate the Bluetooth
®
function. You will hear a beep and Pairing
flashes on the display 1.
♦ Set the external playback device so that it scans for Bluetooth
®
devices.
You can find a detailed description of how to do this in the operating
instructions for your external playback device.
♦ From the list of discovered Bluetooth
®
devices in the settings menu of your
external playback, select the entry SBDB 5 A1. The external playback de-
vice will now connect to the radio automatically via Bluetooth
®
. You will
hear a another beep when the connection has been successfully established
and Connected appears on the display1.
You can now use the radio to listen to music from your external playback device
wirelessly via the radio's speaker.
NOTE
► The next time you turn on the radio, it will connect automatically to the
last-connected external playback device. If your external playback device
does not automatically reconnect to the radio, you will have to re-establish
the connection manually. You can find a detailed description of how to do
this in the operating instructions for your external playback device.
Unpairing devices
If you want to connect the radio to another external playback device, you must
first unpair the currently connected playback device:
♦ Press the SOURCE/ button 4 for about 2 seconds. You will hear a
beep
and Pairing flashes on the display 1. Alternatively, you can unpair
via
the currently connected external playback device.

Silvercrest SBDB 5 A1 Specifications

General

Brand	Silvercrest
Model	SBDB 5 A1
Category	Radio
Language	English