Silvercrest SBF 5.0 A1 - Automatic Reconnection and New Pairing; Managing Bluetooth Connections

SBF 5.0 A1
GB
│
IE
│
49 ■
NOTE
► Using the joint w, align the hands-free set so that
you have the best possible view of the display 1.
► The next time you turn on the hands-free set, it will
connect automatically to the last-connected mobile
phone. If your mobile phone does not automatically
reconnect to the hands-free set you must re-establish
the connection manually. A detailed description of
how to do this is to be found in the operating instruc-
tions for your mobile telephone.
► If you want to connect the hands-free set to another
mobile phone, deactivate the Bluetooth
®
function
on the connected mobile phone or hold down the
button 6 for 2 seconds. You will hear the message
"Disconnected" followed by "Bluetooth
®
mode;
wait for connection". " " flashes on the display1.
The hands-free set can be paired with another mobile
phone immediately.
► If a playback source is connected, it is automatically
activated after a few seconds and the pairing mode is
terminated. In this case, press the
button 6 briefly
or repeatedly until " " flashes on the display 1 to
activate pairing mode.
IB_340116_SBF5.0A1_LB8.indb 49 17.07.20 09:36