Silvercrest SBF 5.0 A1 - Telephone Functions; Call Management: Accepting, Ending, and Making Calls

SBF 5.0 A1
GB
│
IE
│
51 ■
Telephone functions
The following telephone functions are only available if the
hands-free car set is connected to your car radio and there
is an Bluetooth
®
connection to your mobile phone.
NOTE
►
It is possible that not all functions will be supported
depending on the mobile phone used and its operating
system.
Accepting/ending a call
When an incoming call is received, “ ” appears on the
display 1 and the incoming phone number is announced
in English. The ring tone comes from your mobile phone.
If the ring tone is switched off on your mobile phone, the
incoming phone number is not announced either.
♦ Press the
dial 4 once briefly to accept the call.
“ ” is shown on the display during the call.
♦ Press the dial 4 once briefly to end the call.
Making a call
♦ Use your mobile phone to dial the required telephone
number. “ ” is shown on the display1 during an
outgoing call.
IB_340116_SBF5.0A1_LB8.indb 51 17.07.20 09:36