SDBSB 3000 A1
GB
│
IE
│
9 ■
Package contents and transport inspection
The appliance is supplied with the following components as a standard:
● Steam iron station
● Cleaning brush
● Velcro tape (for fastening the power cable)
● Operating instructions
NOTE
► Check the package for completeness and signs of visible damage.
► If the delivery is incomplete or damage has occurred as a result of defective
packaging or during transport, contact the Service hotline (see section
Service).
♦ Remove all parts of the appliance and the operating instructions from the
box.
♦ Removal packaging material and protective film.
DANGER
► Do not allow children to play with packaging materials. There is a risk of
suffocation.
Setting up and connecting
Requirements for the set-up location
The work service on which you place the base station must be stable, flat and
heat-resistant.
Electrical connection
♦ Insert the mains cable plug into a properly connected and earthed mains
power socket supplying the voltage specified in the section Technical data.
To Next Page
Loading...
