SDBSB 3000 A1
GB
│
IE
│
15 ■
5) While ironing, press and hold the steam button 2 to continuously spray
steam from the soleplate 8 onto the items being ironed (see fig. 9).
6) Release the steam button
2 to stop producing steam.
Fig. 9
NOTE
► When you press the steam button
2, it can take a few seconds until steam
comes out of the soleplate 8.
7) After ironing, place the iron on the stand
6 of the base station and set the
temperature control
3 to min.
8) Press the On/Off button
e for about 2 seconds to switch on the appliance.
The On/Off control lamp
r and the steam control lamp high z/
medium
u/low i (depending on the setting) go out.
9) Pull the plug out of the mains socket.
Vertical steam ironing
1) Hang the piece of fabric you want to iron on a clothes hanger hanging from
a heat-resistant surface.
2) Press the On/Off button
e to switch on the appliance. The On/Off control
lamp r lights up blue and the steam control lamp low i flashes blue.
3) Turn the temperature control
3 to the desired ironing temperature. The tem-
perature control 3 must be set within the range to produce steam.
Wait until the heat-up indicator lamp 1 goes out.
4) Press the
+
o or the
‒
button p to set the desired steam strength:
– If the steam control lamp high
z lights up, a large quantity of steam is
produced.
To Next Page
Loading...
Need help?
General
