Silvercrest SDBSB 3000 A1 - Ironing Without Steam; Garment Care Label Check; Setting Ironing Temperature

SDBSB 3000 A1
■ 12
│
GB
│
IE
MAX
MIN
Fig. 4
4) Push the water tank 0 back into the base station until it clicks audibly into
place.
NOTE
► Do not tip or swing the steam iron station when the water tank is full
0.
Otherwise the water can flow out of the filler opening 9.
Ironing without steam
CAUTION! PROPERTY DAMAGE!
► Check the care instructions on the labels in garments to see if they are
suitable for being ironed and at which temperature setting.
► If the clothing care instructions forbid ironing (
), the garment may not
be ironed. Ignoring this warning could lead to permanent damage to the
clothing item.
NOTE
Always set the temperature control
3 to the lowest level min before switching
the appliance on. The symbols on the temperature control 3 correspond to
the following settings (see also fig. 5):
Temperature control
symbol 3
Material
Temperature
(approx.)
Synthetics 70–120C
Silk 100–160C
Cotton/linen 140–210C