GB
│
IE
│
NI
│
CY
│
23 ■
SDGS 1630 A1
Scope of the warranty
This tool has been manufactured according to strict quality guidelines and
inspected meticulously prior to delivery.
The warranty covers material faults or production faults. The warranty does not
extend to product parts subject to normal wear and tear that could be consid-
ered as consumable parts, or to damage to fragile parts, such as switches or
batteries.
The warranty does not apply if the product has been damaged, improperly used
or improperly maintained. The directions in the operating instructions for the
product regarding proper use of the product are to be strictly followed. Uses and
actions which are discouraged in the operating instructions or which are warned
against must be avoided.
This product is intended solely for private use and not for commercial purposes.
The warranty will be deemed void in cases of misuse or improper handling, use
of force and modifications/repairs that have not been carried out by one of our
authorised service centres.
Warranty claim procedure
To ensure quick processing of your case, please observe the following instructions:
♦ Please have the till receipt and the item number (e.g. IAN 12345) available
as proof of purchase.
♦ You will find the item number on the type plate, an engraving on the front
page of the instructions (bottom left), or as a sticker on the rear or bottom of
the appliance.
♦ If functional or other defects occur, please contact the service department
listed either by telephone or by e-mail.
♦ You can return a defective product to us free of charge to the service address
that will be provided to you. Ensure that you enclose the proof of purchase
(till receipt) and information about what the defect is and when it occurred.
You can download these instructions along with many other manuals,
product videos and software on www.lidl-service.com.
To Next Page
Loading...
Need help?
General
