Silvercrest SDGS 1630 A1 User Manual

■ 12
│
GB
│
IE
│
NI
│
CY
SDGS 1630 A1
4) Screw the lid tight and turn the water tank t around again (fig. J). Check that
the lid is closed tight enough that no water can escape.
5) Put the water tank
t back onto the appliance base z (fig. K).
Operation
WARNING – RISK OF INJURY!
► Never attempt to steam pieces of clothing while they are being worn.
NOTE
► When using the appliance, make sure to remove all materials that could
block the casters
o of the garment steamer from the floor (use the appli-
ance on a level, horizontal surface).
► Do not use the appliance on very thick rugs or carpets.
1) Loosen the Velcro strap
0 (fig. L) and unroll the power cable 9 fully.
2) Plug the power cable
9 into the mains power socket and switch on the
appliance by pressing the On/Off switch u on the front of the appliance
(fig. M). The operating light i flashes green while the appliance is heating
up. When the appliance starts producing steam, the operating light i lights
up permanently green.
3) Hang your clothing item on the integrated clothes hanger
3 or another
clothes hanger that you can attach to the clothes hanger mount
5 of the
integrated clothes hanger
3. Also use the clips for trousers/dresses 4 in the
integrated clothes hanger
3 to steam trousers or dresses (fig. N).
4) Take hold of the steam head
1. Make sure you aim the steam openings
away from your body
.
5) Start at the top of the piece of clothing and move the steam head
1 down
slowly (fig
. O). Make sure that the steam hose
w is always vertical.
6) To make your work easier, clamp the bottom of the clothing into the diagonal
bracket
7 before you start steaming (fig. P). Pull out and rotate the bracket to
move it to the desired position (fig. Q).
K

Silvercrest SDGS 1630 A1 Specifications

General

Brand	Silvercrest
Model	SDGS 1630 A1
Category	Steam Cleaner
Language	English