■ 40
│
GB
│
IE
Multipoint function
The multipoint function allows you to use the hands-free set with two
mobile phones simultaneously. This is useful for users with a private
and a business mobile phone.
♦ The pairing of additional mobile phones is carried out in the
same manner as described in the section “Pairing the hands-
free set with a compatible mobile phone”. Start the pairing
process for each phone with the hands-free set switched off.
If you have paired several mobile phones, the hands-free set will now
have several “known” devices available. This status is a prerequisite
for an active connection between the hands-free set and other
mobile phones. A maximum of 8 mobile phones can be saved as
“known” devices. The number of devices that can be actively linked
to the hands-free set is limited to two.
As soon as one or two of the known devices come into range of the
hands-free set, the connection to the devices is made automatically.
In some cases, you must confirm the connection manually on your
mobile phone. If a third “known” device comes into range of the
hands-free set, the connection to this device will remain blocked until
one of the two active connections is broken or one of the two devices
leaves the transmission range. If the connection of one of the paired
devices is broken, the link becomes free for the third (waiting) device.
If two mobile phones are linked to the hands-free set, different ring
tones are used for incoming calls.
To Next Page
Loading...
Need help?
General
