■ 44
│
GB
│
IE
Muting the microphone
You can temporarily mute the microphone during a call so that
the other caller cannot hear you.
♦ Press the mute button
. You will hear a beep and the oper-
ating LED lights up orange. The microphone is now muted.
♦ Press the mute button
again to end the muting. You will
hear a beep and the operating LED lights up blue every
6 seconds. The microphone is now reactivated.
Resetting the hands-free set
The hands-free set can be paired with up to 8 mobile phones.
To delete the pairing list and reset the hands-free set to the factory
defaults, proceed as follows:
♦ Switch the hands-free set off and on again.
♦ Press and hold the
button and the button simultane-
ously for about 10 seconds. The operating LED flashes white
and you will hear a beep. The pairing list is deleted and the
hands-free set is reset to the factory defaults.
♦ Afterwards, the operating LED
flashes alternately blue and
orange. The hands-free set is now in pairing mode and can be
paired with a new mobile phone.