■ 42
│
GB
│
IE
Accepting/ending a call
When there is an incoming call, the operating LED flashes blue
every 3 seconds and you can hear a ring tone over the hands-free
set. Even if the call tone is switched off on your mobile phone, you
will still hear the ring tone via the hands-free set.
♦ Press the multifunction button
once briefly to accept
the call.
♦ Press the multifunction button
once briefly to finish the
ongoing call.
Handing over a call between hands-free set and
mobile phone
During a call you can hand over a call between the hands-free set
and the mobile phone.
♦ Press the
button and the button simultaneously during
a call. You will hear a beep and the call will be transferred to
the mobile phone.
♦ Pressing the
button and the button again will transfer
the call back to the hands-free set.
Manage calls
If you have connected two mobile phones to the hands-free set simul-
taneously, you can put one call on hold in order to take a call from a
second mobile phone and to toggle between the two calls.
♦ Press the multifunction button
twice briefly to accept
the call on the second mobile phone while talking on the first
mobile phone. The first call is put on hold.
To Next Page
Loading...
Need help?
General
