EasyManua.ls Logo

Silvercrest SFA 40 A1 - Pairing Failures

Silvercrest SFA 40 A1
134 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SFA 40 A1
46
GB
IE
The hands-free set cannot be paired with a mobile
phone
Check whether the Bluetooth
®
function is activated on your
mobile phone.
Check whether the hands-free set is switched on.
If you use multiple mobile phones, ensure that there is only one
active connection with a mobile phone.
Make sure that the hands-free set is no more than 10 metres
from the mobile phone and that there are no barriers or elec-
tronic devices between them.
Changing the fuse in the car charger adapter
There is a fuse in the car charger adapter
to protect the vehicle’s
on-board power supply. If the device no longer works, check the fuse
and replace if necessary.
Open the car charger adapter
by turning the screw insert
(C) carefully anticlockwise with a pair of pliers and carefully
removing it.
Remove the plug tip (B) from the fuse (A) and pull out the fuse.
Now insert a new type F2AL 250 V fuse into the car charger
adapter
, fit the plug tip (B) onto the slightly protruding end
of the fuse and screw the previously removed screw insert (C)
back in.

Table of Contents

Other manuals for Silvercrest SFA 40 A1

Related product manuals