Silvercrest SFB 10.1 C3 User Manual

SilverCrest SFB 10.1 C3
English - 17
6. Press and select the correct value for the hour. You
can also adjust the value by using the numeric keypad (11).
7. Press to toggle to minute setting mode.
8. Press and select the correct value for the minutes. You
can also adjust the value by using the numeric keypad (11).
9. If you selected “12HR” in step 4, you can press to select the
PM/AM setting. Press to toggle between PM and
AM.
10. Press to confirm your entry and save the setting. The display
reads “SUCCESS” followed by “TIME SETUP”.
Press to go back one menu level. To return to the start window,
press one of the device buttons.
Setting the date (DATE SETUP)
1. Press and hold the button for 3 seconds.
2. Press , select “CONFIGURE” and press to confirm.
3. Press , select “DATE SETUP” and press to confirm.
4. The current date appears and the year flashes. Press the
buttons to set the correct year.
5. Press until the month display flashes. Press the
buttons to set the correct month.
6. Press until the day display flashes. Press the
buttons to set the correct day. Press to confirm your entries. The
display reads “SUCCESS” followed by “DATE SETUP”.
7. Once the date has been set properly, in the upper right corner of the
display the abbreviated day of the week is shown.
Press to go back one menu level. To return to the start window,
press one of the device buttons.
Adjusting the keypad light time (TIME)
1. Press and hold the button for 3 seconds.
2. Press , select “CONFIGURE” and press to confirm.
3. Press , select “LIGHT-TIME” and press to confirm.
4. Press to set the light duration of the remote control in
5-second increments between 0 and 60 seconds. If you select 0
seconds, the light remains off when any button is pressed. When set
to 0 seconds, the light can be switched on manually by pressing the
button. In this case it will light for 5 seconds.
5. Press to confirm your entry and save the setting. The display
reads “SUCCESS” followed by “LIGHT-TIME”.
Press to go back one menu level. To return to the start window,
press one of the device buttons.
Please note that setting a longer light duration will shorten
the battery life.

Silvercrest SFB 10.1 C3 Specifications

General

Brand	Silvercrest
Model	SFB 10.1 C3
Category	Remote Control
Language	English