SFPW 360 B1
GB
│
IE
│
39 ■
If reception of the DCF signal fails, the radio-con-
trolled projection alarm clock will stop trying to estab-
lish reception after around 7 minutes. Reception can
be considerably restricted by obstacles (e.g. concrete
walls) or interference sources (e.g. other electronic
appliances).
If reception problems persist, try changing the loca-
tion of the appliance (e.g. put it by a window).
Displays in basic mode
Once the radio-controlled projection alarm clock has
received the DCF signal, it is in basic mode. In basic
mode, the following information is shown on the
display:
The date of the current day is displayed next to the
abbreviation D and the current month appears next to
the abbreviation M. The abbreviation for the current
weekday is shown on the right.
The language for this abbreviation is preset to Ger-
man but can be changed if required. The weekday
display can also be changed to display the calendar
week (see section Display calendar week).
To Next Page
Loading...
