Silvercrest SFPW 360 B1 Operating Instructions

SFPW 360 B1
GB
│
IE
│
43 ■
♦ Press the – /WEEK LANG button or the
+/ZONE 12/24 button to set the desired value.
♦ Press the SET button to confirm your entry. The
second clock time is shown on the display.
International time display/time zone
You can use this function to show any desired time
zone on the display.
NOTICE
In countries that can receive the DCF signal but are
in a different time zone, you can set the correspond-
ing time zone.
If you are in a country where the local time is one
hour ahead of Central European Time (CET +1), you
should set the time zone to
0 1
. The time will continue
to be controlled by the DCF signal, but the device
will display the correct local time.
Setting the time zone
♦ In basic mode, press the +/ZONE 12/24 but-
ton for about 3 seconds. ZONE appears on the
display.
♦ Press the SET button for about 3 seconds.
The display flashes
0 0
.
♦ Press the – /WEEK LANG button or the
+/ZONE 12/24 button to set the desired value.
♦ Press the SET button to confirm your entry. The
time of the time zone is shown on the display.
♦ Press the
+/ZONE 12/24 button for about
3seconds to switch between the time zone
(ZONE) and the local time.

Silvercrest SFPW 360 B1 Specifications

General

Brand	Silvercrest
Model	SFPW 360 B1
Category	Alarm Clock
Language	English