Silvercrest SFPW 360 B1 Operating Instructions

SFPW 360 B1
■ 40
│
GB
│
IE
The time is shown in 24-hour format by default. If
you select the 12-hour format, the abbreviation PM
(Latin: "post meridiem" = afternoon) is shown in front
of the time between 12 noon and 11.59 at night. The
abbreviation AM (Latin: "ante meridiem" = morning)
is shown in front of the time between 12 midnight and
11.59 in the morning. During the summer period,
DST (daylight saving time) is displayed. This display
is only shown if the DCF signal is being received.
The room temperature is displayed to one decimal
place under the time. The preset temperature unit is
degrees Celsius (
) and can be changed to degrees
Fahrenheit (
).
Handling and operation
Setting the date and time manually
NOTICE
If no button is pressed for around 20 seconds
during manual setting of the time, the appliance
exits setting mode.
Any settings already made will be saved.
♦ In basic mode, press the SET button  for about 3
seconds. The year flashes on the display.
♦ Press the – /WEEK LANG button or the
+/ZONE 12/24 button to set the desired value.
♦ Press the SET button to confirm your entry.
The month display flashes on the display.
♦ Press the – /WEEK LANG button or the
+/ZONE 12/24 button to set the desired
value.

Silvercrest SFPW 360 B1 Specifications

General

Brand	Silvercrest
Model	SFPW 360 B1
Category	Alarm Clock
Language	English