Silvercrest SFPW 360 B1 Operating Instructions

SFPW 360 B1
GB
│
IE
│
45 ■
Activating/deactivating the alarm
After setting the respective alarm times, these must still
be activated.
♦ Push the On/Off switch
 or - to the "ON"
position. The respective alarm symbol (
 )
appears on the display and indicates that alarm
1 or 2 is activated.
♦ Push the On/Off switch  or - to the "OFF"
position. The respective alarm symbol (  ) goes
out on the display and alarm1 or2 is deactivated.
Switching off the alarm signal
The alarm signal will sound at the set time for around
4minutes and the corresponding alarm symbol (
or ) flashes on the display.
♦ Press any button other than the
button
to turn off the alarm signal.
You do not have to reactivate the alarm function. The
alarm signal will automatically sound again at the set
time on the next day.
Snooze function
♦ While the alarm is going off, press the but-
ton to activate the snooze function.
The alarm signal is interrupted for around 5minutes.
The snooze symbol (
) and respective alarm symbol
( or ) flash on the display.

Silvercrest SFPW 360 B1 Specifications

General

Brand	Silvercrest
Model	SFPW 360 B1
Category	Alarm Clock
Language	English